前段时间碰到一位牛B的人物,帮我修正了vsftpd基于PAM认证的问题.今天又碰到N个问题,比如Access denied. 和403错误,无法上传文件等等之类的错误.于是,只好请这个高人再次出马,帮忙再次修正.很感谢这位牛B人物.在利益大于一切的这个X蛋的社会,还能为了咱们这群小菜鸟去分析N个文件..这种精神实在是值得佩服.
针对我自己本身出现的问题,将高人与我的QQ聊天记录整理了一份,然后再加上实际的操作.终于让我大彻大悟.现在与大家狠狠的分享这位高人的成果.
用户上传文件访问出现403或者Access denied.
解答:这个主要是权限问题,在用户vsftpd.conf中加上:anon_umask=022或者anon_umask=133,022指755权限.133指644权限，再将给权限给该文件chmod 644 XX.php或者chmod 644 name
用户无法上传文件,出现550或者是553错误
可能是用户组有问题.比如你的网站用www这个用户来访问,那么就将vsftpd.conf中的guest_username=XXX改成www
另外贴出来我的vsftpd的配置文件:
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
针对我自己本身出现的问题,将高人与我的QQ聊天记录整理了一份,然后再加上实际的操作.终于让我大彻大悟.现在与大家狠狠的分享这位高人的成果.
用户上传文件访问出现403或者Access denied.
解答:这个主要是权限问题,在用户vsftpd.conf中加上:anon_umask=022或者anon_umask=133,022指755权限.133指644权限，再将给权限给该文件chmod 644 XX.php或者chmod 644 name
用户无法上传文件,出现550或者是553错误
可能是用户组有问题.比如你的网站用www这个用户来访问,那么就将vsftpd.conf中的guest_username=XXX改成www
另外贴出来我的vsftpd的配置文件:
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
