def new generation total 55296K, used 52568K [0x1ebd0000, 0x227d0000, 0x227d0000)
eden space 49152K, 99% used [0x1ebd0000, 0x21bce430, 0x21bd0000)
from space 6144K, 55% used [0x221d0000, 0x22527e10, 0x227d0000)
to space 6144K, 0% used [0x21bd0000, 0x21bd0000, 0x221d0000)
tenured generation total 69632K, used 2696K [0x227d0000, 0x26bd0000, 0x26bd0000)
the space 69632K, 3% used [0x227d0000, 0x22a720f8, 0x22a72200, 0x26bd0000)
compacting perm gen total 8192K, used 2898K [0x26bd0000, 0x273d0000, 0x2abd0000)
the space 8192K, 35% used [0x26bd0000, 0x26ea4ba8, 0x26ea4c00, 0x273d0000)
ro space 8192K, 66% used [0x2abd0000, 0x2b12bcc0, 0x2b12be00, 0x2b3d0000)
rw space 12288K, 46% used [0x2b3d0000, 0x2b972060, 0x2b972200, 0x2bfd0000)
34.735: [DefNew: 52568K->3433K(55296K), 0.0072126 secs] 55264K->6615K(124928K)Heap after gc invocations=8:
def new generation total 55296K, used 3433K [0x1ebd0000, 0x227d0000, 0x227d0000)
eden space 49152K, 0% used [0x1ebd0000, 0x1ebd0000, 0x21bd0000)
from space 6144K, 55% used [0x21bd0000, 0x21f2a5e8, 0x221d0000)
to space 6144K, 0% used [0x221d0000, 0x221d0000, 0x227d0000)
tenured generation total 69632K, used 3182K [0x227d0000, 0x26bd0000, 0x26bd0000)
the space 69632K, 4% used [0x227d0000, 0x22aeb958, 0x22aeba00, 0x26bd0000)
compacting perm gen total 8192K, used 2898K [0x26bd0000, 0x273d0000, 0x2abd0000)
the space 8192K, 35% used [0x26bd0000, 0x26ea4ba8, 0x26ea4c00, 0x273d0000)
ro space 8192K, 66% used [0x2abd0000, 0x2b12bcc0, 0x2b12be00, 0x2b3d0000)
rw space 12288K, 46% used [0x2b3d0000, 0x2b972060, 0x2b972200, 0x2bfd0000)
}
, 0.0757599 secs]
⑦ -Xloggc:filename:与上面几个配合使用，把相关日志信息记录到文件以便分析。
四、常见配置汇总
1、堆设置
① -Xms:初始堆大小
② -Xmx:最大堆大小
③ -XX:NewSize=n:设置年轻代大小
④ -XX:NewRatio=n:设置年轻代和年老代的比值。如:为3，表示年轻代与年老代比值为1：3，年轻代占整个年轻代年老代和的1/4
⑤ -XX:SurvivorRatio=n:年轻代中Eden区与两个Survivor区的比值。注意Survivor区有两个。如：3，表示Eden：Survivor=3：2，一个Survivor区占整个年轻代的1/5
⑥ -XX:MaxPermSize=n:设置持久代大小
2、收集器设置
① -XX:+UseSerialGC:设置串行收集器
② -XX:+UseParallelGC:设置并行收集器
③ -XX:+UseParalledlOldGC:设置并行年老代收集器
④ -XX:+UseConcMarkSweepGC:设置并发收集器
3、垃圾回收统计信息
① -XX:+PrintGC
② -XX:+PrintGCDetails
③ -XX:+PrintGCTimeStamps
④ -Xloggc:filename
4、并行收集器设置
① -XX:ParallelGCThreads=n:设置并行收集器收集时使用的CPU数。并行收集线程数。
