如果你没有软驱，你可以按照下面的方法安装 Intel Matrix Storage Manager Driver
Note: If you select AHCI for Serial ATA (SATA) in the BIOS Setup Utility before installing Intel Matrix Storage Manager Driver, your computer will not respond; it will only display a blue screen.
注意：如果你把SATA选成了AHCI模式，那么当你安装 Intel Matrix Storage Manager Driver 之前系统会没有反应，蓝屏
1. Start the BIOS Setup Utility menu.
2. Select "Config".
3. Select "Serial ATA (SATA)".
4. Select "Compatibility".
1～4，就是开机，按F1进bios，然后把SATA选成compatibility模式。
5. Install Windows XP and Service Pack 2.
5，正常安装windows xp
6. Download Intel Matrix Storage Manager Driver from the Web site and extract the driver to C:DRIVERSWINSATA.
6，下载 Intel Matrix Storage Manager Driver 并解压到C:DRIVERSWINSATA
7. Run Intel Matrix Storage Manager Driver. To do this, go to C:DRIVERSWINSATAPREPARE, and double-click install.cmd.
7，运行C:DRIVERSWINSATAPREPARE中的install.cmd，安装Intel Matrix Storage Manager Driver
8. Turn the computer off and then on again.
8，重启
9. Start the BIOS Setup Utility menu.
10. Select "Config".
11. Select "Serial ATA (SATA)".
12. Select "AHCI".
9～12，进入bios把sata模式改回AHCI
13. Start Windows XP. The Welcome to the Found New Hardware Wizard appears.
14. Click "No, not this time", and then click "Next".
15. Select Install from a list or specific location (Advanced), and then click Next.
16. Select "Search for the best driver in these locations". Then select "Include this location in the search:", specify the path, C:DRIVERSWINSATA, and click "Next". The Completing the Found New Hardware Wizard appears.
17. Click "Finish".
18. When the System Settings Change window appears, click "Yes". The computer restarts.
13～18，进入操作系统，发现新硬件，指向C:DRIVERSWINSATA完成驱动程序的安装
