因编辑器过滤了一些字符，比如&，所以下面的脚本可能会运行错误。。看官添加&&这个字符就可以了。
vbs脚本的功能呢是很多的，不过有时候我们只需要其中的某些功能，今天我突然想研究下怎么用vbs脚本实现添加程序到自启动项......
首先来一段吧...
'==========================================================================
'
' VBScript Source File -- Created with SAPIEN Technologies PrimalScript 4.1
'
' NAME: add2run01.vbs
'
' AUTHOR: shile
' DATE : 2008-12-13
'
' COMMENT: vbs实现添加程序到自启动项
'
'==========================================================================
On Error Resume Next '出错继续执行下个命令
dim ws
Set ws=CreateObject("Wscript.Shell")
ws.RegWrite "HKLMSoftwareMicrosoftWindowsCurrentVersionRuncmd","cmd.exe"
竟然被360安全卫士拦截了，不过点击同意就可以了。在autoruns里面刷新后还是不能显示这个启动项，看来这软件不太完美.
功能太弱了，我想增强一下....
首先，弹个窗口询问询问添加什么程序到启动项，并且询问下启动项的键值。
'==========================================================================
'
' VBScript Source File -- Created with SAPIEN Technologies PrimalScript 4.1
'
' NAME: add2run02.vbs
'
' AUTHOR: shile
' DATE : 2008-12-13
'
' COMMENT: vbs实现添加程序到自启动项
'
'==========================================================================
On Error Resume Next '出错继续执行下个命令
Dim ws
Set ws=CreateObject("Wscript.Shell")
Dim runKey,runPath
runKey = InputBox("输入自启动项键值名称","请输入")
runPath = InputBox("输入相应的程序路径","请输入")
'ws.RegWrite "HKLMSoftwareMicrosoftWindowsCurrentVersionRuncmd","cmd.exe"
ws.RegWrite "HKLMSoftwareMicrosoftWindowsCurrentVersionRun"&runKey,runPath
'提示下
MsgBox "添加"&runKey"<"&runPath">成功",vbYes,"恭喜!"
本来要用vbOK的，但是发现还是两个按钮，还是vbYes好！
功能还是不太强的，如果能判断是否存在已经有的项，是否替换确认，那么就比较完善了！
继续下去...
'==========================================================================
'
' VBScript Source File -- Created with SAPIEN Technologies PrimalScript 4.1
'
' NAME: add2run03.vbs
'
' AUTHOR: shile
' DATE : 2008-12-13
'
' COMMENT: vbs实现添加程序到自启动项
'
'==========================================================================
On Error Resume Next '出错继续执行下个命令
dim ws
Set ws=CreateObject("Wscript.Shell")
Dim runKey,runPath
runKey = InputBox("输入自启动项键值名称","请输入")
runPath = InputBox("输入相应的程序路径","请输入")
Dim temp,ret
temp = ws.RegRead("HKLMSoftwareMicrosoftWindowsCurrentVersionRun"&runKey)
'MsgBox temp
If temp <> Empty Then
ret = MsgBox( "键值"&runKey"已经存在,其值为"&temp",是否替换为新的值"&runPath, vbOKCancel, "提示!")
If ret = vbOK Then
ws.RegWrite "HKLMSoftwareMicrosoftWindowsCurrentVersionRun"&runKey,runPath
MsgBox "修改"&runKey"值为"&runPath"成功",vbYes,"恭喜!"
End If
Else
ws.RegWrite "HKLMSoftwareMicrosoftWindowsCurrentVersionRun"&runKey,runPath
MsgBox "添加"&runKey"<"&runPath">成功",vbYes,"恭喜!"
End If
